Step 1: Place 3 drops of Biotrue multipurpose solution on each side of the lens surface and gently rub for 20 seconds.

Step 2: Rinse each side of the lens for 5 seconds with Biotrue multipurpose solution.

Step 3: Place the now cleaned lens in the lens case filled with Biotrue multipurpose solution. Let it soak for at least 4 hours. Remember to always use fresh solution - never reuse solution.

Lenses may be stored in the unopened case until ready to wear, up to a maximum of 30 days. If you store your lenses for longer periods of time, they must be cleaned and disinfected with fresh Biotrue multi-purpose solution prior to lens insertion.

Store below 25°C

Always read the label and follow the directions for use. Keep out of reach of children. 

Failure to discard solution from lens case after each use or use of water to care for your lenses may lead to contamination resulting in eye injury and potential loss of vision. Do not use heat disinfection regimen. If you are allergic to any ingredient in this product, do not use.

Problems with contact lenses and lens care products could result in corneal infection and/or ulcer and lead to loss of vision.

 If you experience eye discomfort, excessive tearing, vision changes, redness of the eye, immediately remove your lenses and promptly contact your eye care professional. Discard your solution immediately after your lenses have been removed from the lens case.

You should not expose or store your lenses in or rinse your lens case with any water, such as tap, bottled or distilled, or with any non-sterile solution.