Breath a Tech Spacer

The Breath-A-Tech Spacer is a compact and durable spacer, suitable for use with all standard puffers.

The Breath-A-Tech Spacer is designed to improve the delivery of aerosol medication from puffers in the management of asthma and COPD, helping you to breathe better.

Shake the puffer immediately before each use. Insert the puffer into the flexible end cap of the spacer, remove the protective safety cap from the mouthpiece and hold up to the mouth. Press the puffer once to dispense a single dose of medication and breath in and out normally for about 4 breaths. If a second dose is required, pause one minute before repeating the procedure.

For Single Patient Use only.

Breath A Tech Device Care and Cleaning Guide

The Breath-A-Tech should be cleaned before first use and then monthly according to the following instructions:

• Disassemble the Breath-A-Tech. Immerse all parts in clean lukewarm water and dishwashing detergent. Agitate gently and remove.
• DO NOT rinse. The detergent helps to reduce the static charge in the chamber.
• Shake off excess liquid, leave to drain in a vertical position.
• Air dry without rubbing or rinsing. Drying with a cloth or towel can result in an electrostatic charge and reduce the amount of medication you receive when you next use it.
• When reassembling the Breath-A-Tech spacer care should be taken when fitting the valve by ensuring the 4 chamber location pegs are lined up with the 4 holes in the valve – to assemble hold chamber upright with valve located correctly before gently screwing mouthpiece to chamber.